Metal-organic framework-based nanomaterials as opto-electrochemical sensors for the detection of antibiotics and hormones: A review

• Akeem Adeyemi Oladipo,
• Saba Derakhshan Oskouei and
• Mustafa Gazi

Beilstein J. Nanotechnol. 2023, 14, 631–673, doi:10.3762/bjnano.14.52

• ) sensors have been developed for antibiotic and hormone detection analyses to address the limitations of the standard analytical methods. These sensors’ advantages include high sensitivity, low cost, rapid analysis time, simplified operation without the need for complicated and expensive instrumentation

• brief summary and discussion of MOF synthesis methods. This review begins by summarising the importance of monitoring and detecting hormones and antibiotics in various matrices. The traditional analytical methods employed for detecting pharmaceutical residues are then briefly described. Comprehensive

Molecular nanoarchitectonics: unification of nanotechnology and molecular/materials science

• Katsuhiko Ariga

Beilstein J. Nanotechnol. 2023, 14, 434–453, doi:10.3762/bjnano.14.35

• conventional analytical methods. It is also possible to reveal how functional sites such as catalysts are incorporated into the immobilization process. For example, an atomistic understanding of the structure of heterogeneous catalysts consisting of MoO2 complexes on carbon nanohorns has been reported [43

Recent advances in green carbon dots (2015–2022): synthesis, metal ion sensing, and biological applications

• Aisha Kanwal,
• Naheed Bibi,
• Sajjad Hyder,
• Arif Muhammad,
• Hao Ren,
• Jiangtao Liu and
• Zhongli Lei

Beilstein J. Nanotechnol. 2022, 13, 1068–1107, doi:10.3762/bjnano.13.93

• excitation levels above 480 nm. Since small organic molecules are free in solution, it follows that even when carbon cores do exist, the origin of the fluorescence is attributed to these molecules [134]. Characterization of CDs There are several published analytical methods for characterization, illustrating

Analytical and numerical design of a hybrid Fabry–Perot plano-concave microcavity for hexagonal boron nitride

• Felipe Ortiz-Huerta and
• Karina Garay-Palmett

Beilstein J. Nanotechnol. 2022, 13, 1030–1037, doi:10.3762/bjnano.13.90

• for a hybrid plano-concave microcavity, containing a multilayer of hBN hosting a SPE (Figure 1), by using analytical methods and FDTD simulations. Fabrication design steps are first shown for our microcavity, afterwards we found the range of geometrical parameters necessary for our stable resonator

A nonenzymatic reduced graphene oxide-based nanosensor for parathion

• Sarani Sen,
• Anurag Roy,
• Ambarish Sanyal and
• Parukuttyamma Sujatha Devi

Beilstein J. Nanotechnol. 2022, 13, 730–744, doi:10.3762/bjnano.13.65

• , inhalation, or dermal penetration [3][4]. Due to its extreme toxicity, it is necessary that easy-to-use, cost-effective diagnostic kits for routine screening of pesticides in fruits and vegetables are developed. The high-throughput analytical methods such as chromatographic (gas, liquid) and spectroscopic

Nanomechanics of few-layer materials: do individual layers slide upon folding?

• Ronaldo J. C. Batista,
• Rafael F. Dias,
• Ana P. M. Barboza,
• Alan B. de Oliveira,
• Taise M. Manhabosco,
• Thiago R. Gomes-Silva,
• Matheus J. S. Matos,
• Andreij C. Gadelha,
• Cassiano Rabelo,
• Luiz G. L. Cançado,
• Ado Jorio,
• Hélio Chacham and
• Bernardo R. A. Neves

Beilstein J. Nanotechnol. 2020, 11, 1801–1808, doi:10.3762/bjnano.11.162

• obtained interlayer adhesion energy for graphene (0.25 N/m) and talc (0.62 N/m) is in good agreement with recent experimental results and theoretical predictions. The obtained value for the adhesion energy of graphene on a silicon substrate is also in agreement with previous results. Keywords: analytical

• methods; atomic force microscopy (AFM); molecular dynamics (MD); Raman spectroscopy; nanostructured materials; Introduction Layered materials such as graphite, talc, and transition metal dichalcogenides (TMDs), held together by strong covalent bonds within layers and relatively weak van der Waals

Long-term entrapment and temperature-controlled-release of SF₆ gas in metal–organic frameworks (MOFs)

• Hana Bunzen,
• Andreas Kalytta-Mewes,
• Leo van Wüllen and
• Dirk Volkmer

Beilstein J. Nanotechnol. 2019, 10, 1851–1859, doi:10.3762/bjnano.10.180

• molecules left in the pores, thus ensuring that the whole pore volume was available for trapping the SF6 guest. The bulk sample was analyzed before and after the gas loading by conventional analytical methods, including FTIR, powder X-ray diffraction (XRD) and thermogravimetric analysis (TGA). SF6-loading

Serum type and concentration both affect the protein-corona composition of PLGA nanoparticles

• Katrin Partikel,
• Robin Korte,
• Dennis Mulac,
• Hans-Ulrich Humpf and
• Klaus Langer

Beilstein J. Nanotechnol. 2019, 10, 1002–1015, doi:10.3762/bjnano.10.101

• considerably increased indicating that circulation times in human patients may be different than that observed in animal models. However, one has to keep in mind that variations in analytical methods as well as measurement interpretation based on different databases can make direct comparisons of individual

Colloidal solution of silver nanoparticles for label-free colorimetric sensing of ammonia in aqueous solutions

• Alessandro Buccolieri,
• Antonio Serra,
• Gabriele Giancane and
• Daniela Manno

Beilstein J. Nanotechnol. 2018, 9, 499–507, doi:10.3762/bjnano.9.48

• fluid can be efficiently solved by developing methods for the detection of chemical species in the fluid itself. This approach has several advantages, including minimal fluid management and therefore greater reliability of the result. There are many analytical methods to detect ammonia. Electrochemical

Involvement of two uptake mechanisms of gold and iron oxide nanoparticles in a co-exposure scenario using mouse macrophages

• Dimitri Vanhecke,
• Dagmar A. Kuhn,
• Dorleta Jimenez de Aberasturi,
• Sandor Balog,
• Ana Milosevic,
• Dominic Urban,
• Diana Peckys,
• Niels de Jonge,
• Wolfgang J. Parak,
• Alke Petri-Fink and
• Barbara Rothen-Rutishauser

Beilstein J. Nanotechnol. 2017, 8, 2396–2409, doi:10.3762/bjnano.8.239

• by analytical methods to assess their cellular uptake mechanisms and intracellular distribution after uptake at the single-cell level. Both NP types were provided to the cells both as single exposure, or combined as co-exposure. The NP behaviour in complete-serum-containing cell culture media was

Numerical investigation of the tribological performance of micro-dimple textured surfaces under hydrodynamic lubrication

• Kangmei Li,
• Dalei Jing,
• Jun Hu,
• Xiaohong Ding and
• Zhenqiang Yao

Beilstein J. Nanotechnol. 2017, 8, 2324–2338, doi:10.3762/bjnano.8.232

• optimum aspect ratio at which the film carrying force reaches a maximum. However, the optimum aspect ratio is not constant but changes with the Reynolds number. The existence of an optimum texture density and optimum aspect ratio is also observed and proved using experimental and analytical methods in

α-((4-Cyanobenzoyl)oxy)-ω-methyl poly(ethylene glycol): a new stabilizer for silver nanoparticles

• Jana Lutze,
• Miguel A. Bañares,
• Marcos Pita,
• Andrea Haase,
• Andreas Luch and
• Andreas Taubert

Beilstein J. Nanotechnol. 2017, 8, 627–635, doi:10.3762/bjnano.8.67

• removed from the heating bath for DLS and zeta-potential measurements. Analytical methods Gel permeation chromatography. GPC measurements were done on two 300 × 8 mm2 PSS-GRAM (7 µm particles) columns with porosities of 102–103 Å in N-methyl-2-pyrrolidone (NMP + 0.5 wt % LiBr at 70 °C and a flow rate of

Uptake of the proteins HTRA1 and HTRA2 by cells mediated by calcium phosphate nanoparticles

• Olga Rotan,
• Katharina N. Severin,
• Simon Pöpsel,
• Alexander Peetsch,
• Melisa Merdanovic,
• Michael Ehrmann and
• Matthias Epple

Beilstein J. Nanotechnol. 2017, 8, 381–393, doi:10.3762/bjnano.8.40

• temperature. Analytical methods Dynamic light scattering (DLS) and zeta potential determinations were performed with a Zetasizer Nano series instrument (Malvern Nano-ZS, laser: λ = 532 nm) using the Smoluchowski approximation and taking the data from the Malvern software without further correction. The

Rigid multipodal platforms for metal surfaces

• Michal Valášek,
• Marcin Lindner and
• Marcel Mayor

Beilstein J. Nanotechnol. 2016, 7, 374–405, doi:10.3762/bjnano.7.34

• approaches towards assembling and organizing functional molecules into specific architectures on metal substrates are reviewed here. Particular attention is paid to variations of both, the core structures and the anchoring groups. Furthermore, the analytical methods enabling the investigation of individual

Surface coating affects behavior of metallic nanoparticles in a biological environment

• Darija Domazet Jurašin,
• Marija Ćurlin,
• Ivona Capjak,
• Tea Crnković,
• Marija Lovrić,
• Michal Babič,
• Daniel Horák,
• Ivana Vinković Vrček and
• Srećko Gajović

Beilstein J. Nanotechnol. 2016, 7, 246–262, doi:10.3762/bjnano.7.23

• ]. Analytical methods As described in [49], the size and charge of NPs were measured by dynamic (DLS) and electrophoretic light scattering (ELS), respectively, using Zetasizer Nano ZS (Malvern, UK). Visualization of NPs were done using a transmission electron microscope (TEM, Zeiss 902A). Total silver

pH-Triggered release from surface-modified poly(lactic-co-glycolic acid) nanoparticles

• Manuel Häuser,
• Klaus Langer and
• Monika Schönhoff

Beilstein J. Nanotechnol. 2015, 6, 2504–2512, doi:10.3762/bjnano.6.260

• release of PDADMAC is concluded from 1H NMR spectroscopy. Although 1H NMR spectroscopy lacks sensitivity, it has significant advantages with respect to selectivity and robustness compared to current state of the art analytical methods, such as chromatography and titration strategies [28], which are

Green and energy-efficient methods for the production of metallic nanoparticles

• Mitra Naghdi,
• Mehrdad Taheran,
• Satinder K. Brar,
• M. Verma,
• R. Y. Surampalli and
• J. R. Valero

Beilstein J. Nanotechnol. 2015, 6, 2354–2376, doi:10.3762/bjnano.6.243

• by-products that may need further degradation steps. Conventional analytical methods involve pretreatment steps that generate waste and, therefore, green analytical chemistry can be defined as the use of measurements that generate less waste and are thus safer to the environment and to human health

Optimized design of a nanostructured SPCE-based multipurpose biosensing platform formed by ferrocene-tethered electrochemically-deposited cauliflower-shaped gold nanoparticles

• Wicem Argoubi,
• Maroua Saadaoui,
• Sami Ben Aoun and
• Noureddine Raouafi

Beilstein J. Nanotechnol. 2015, 6, 1840–1852, doi:10.3762/bjnano.6.187

• ; nanotechnology; optimized design; screen-printed carbon electrode (SPCE) nanostructuration; Introduction Simplicity of design, cost-effectiveness and lightweight are among the most important requirements for the design of devices that can be used for the development of on-site analytical methods [1][2][3

Synthesis, characterization and in vitro effects of 7 nm alloyed silver–gold nanoparticles

• Simon Ristig,
• Svitlana Chernousova,
• Wolfgang Meyer-Zaika and
• Matthias Epple

Beilstein J. Nanotechnol. 2015, 6, 1212–1220, doi:10.3762/bjnano.6.124

• analytical methods showed uniform particle sizes independent of the molar metal composition. Only nanoparticles with the highest silver content (Ag/Au 90:10) showed a slightly larger particle size. This can likely be attributed to the comparatively slow reduction process and the different standard potentials

From lithium to sodium: cell chemistry of room temperature sodium–air and sodium–sulfur batteries

• Philipp Adelhelm,
• Pascal Hartmann,
• Conrad L. Bender,
• Martin Busche,
• Christine Eufinger and
• Juergen Janek

Beilstein J. Nanotechnol. 2015, 6, 1016–1055, doi:10.3762/bjnano.6.105

• are usually time demanding and require both a careful execution of experiments and the use of complex and often expensive analytical methods. 2.3.2 The sodium–oxygen (Na/O2) battery: The sodium–oxygen battery is based on the same cell concept as the lithium–oxygen battery, however, only very little

Overview about the localization of nanoparticles in tissue and cellular context by different imaging techniques

• Anja Ostrowski,
• Daniel Nordmeyer,
• Alexander Boreham,
• Cornelia Holzhausen,
• Lars Mundhenk,
• Christina Graf,
• Martina C. Meinke,
• Annika Vogt,
• Sabrina Hadam,
• Jürgen Lademann,
• Eckart Rühl,
• Ulrike Alexiev and
• Achim D. Gruber

Beilstein J. Nanotechnol. 2015, 6, 263–280, doi:10.3762/bjnano.6.25

• secondary electrons [174]. SEM can be combined with a transmission electron detector for STEM or analytical methods, for example, EDX or EELS as described for TEM. For example, SEM with EDX analysis has been used to study the fate of silver NP and ions in an in vitro human gastrointestinal digestion model

Chemoselective silicification of synthetic peptides and polyamines

• Maryna Abacilar,
• Fabian Daus and
• Armin Geyer

Beilstein J. Nanotechnol. 2015, 6, 103–110, doi:10.3762/bjnano.6.10

• it, and to weigh it. NMR is no substitute for other analytical methods but 1H NMR is a single technology that simultaneously monitors the pH value, viscosity, and amount of dissolved molecules. 1H NMR is advantageous for optimizing the experimental settings of silica precipitation process because of

Functionalized polystyrene nanoparticles as a platform for studying bio–nano interactions

• Cornelia Loos,
• Tatiana Syrovets,
• Anna Musyanovych,
• Volker Mailänder,
• Katharina Landfester,
• G. Ulrich Nienhaus and
• Thomas Simmet

Beilstein J. Nanotechnol. 2014, 5, 2403–2412, doi:10.3762/bjnano.5.250

• temperatures below 200 °C, trace amounts of styrene, ethylbenzene, and cumene could be detected at this temperature by analytical methods. After exposure for 2 h at temperatures above 330 °C, styrene fully decomposes producing mainly styrene monomer [8]. When compared with other common natural and synthetic

Peak forces and lateral resolution in amplitude modulation force microscopy in liquid

• Horacio V. Guzman and
• Ricardo Garcia

Beilstein J. Nanotechnol. 2013, 4, 852–859, doi:10.3762/bjnano.4.96

• mechanics and thus their application range is somehow limited. Numerical simulations have supported the development of AM-AFM by predicting several properties of the tip motion [25][26][27]. Those simulations provide the standards against which new experimental or analytical methods should be compared [28

Plasmonics-based detection of H₂ and CO: discrimination between reducing gases facilitated by material control

• Gnanaprakash Dharmalingam,
• Nicholas A. Joy,
• Benjamin Grisafe and
• Michael A. Carpenter

Beilstein J. Nanotechnol. 2012, 3, 712–721, doi:10.3762/bjnano.3.81

• in air) these reactions would induce a change in the dielectric function of the matrix. Such operando studies, combining chemical sensing measurements with analytical methods that simultaneously probe the reaction mechanism that induces the sensing response, remain a challenging experiment under